There are many injection machines by choice. We strongly recommend injection machine with local technical support. This eventually save you time, cost and troubles. Most common problem with the injection machine is from the pump. Constantly running at high pressure would wear the gear pump.
Typically, the clamping force is 1 tonne. Injection can be vertical or horizontal, one injection or two injections by sliding on an axis.
We were asked many times if the conventional high pressure injection machine can be used? There were no good injection reported using conventional injection machine. This is because the molten plastic is injected via a screw which would lead to flashes.
Talk to us if you are interested in LPM machine and mold guideline. We work with German and Chinese injection machine.
