MOLDTITE TECHNOLOGIES

MOLDTITE TECHNOLOGIES

We are specializing in low pressure molding, filter making, composite panel and molding rubber. Our vision is technology for the betterment of life. Our mission is to share our technologies to tackle the real world problems. We are committed to bring value to our esteemed customers - quality at the right price.



Sunday, July 27, 2008

LPM - POLYAMIDE, POLYOLEFIN, PUR HOTMELT


This is an unfilled polyamide with a shore A 85, 500% elongation, glass transition temperature at -40 deg C and UL94-V0 certified. Good performance on electrical and thermal properties. Write to us if you would like more info.

Polyamide does not have good adhesion to PE and PP. This is by far most common thermoplastic for LPM. Water tightness is not possbile with these substrates.

Alternatively, polyolefin provide good adhesion to PE and PP and PUR hotmelt adheres to metal without preheating. Polyolefin shows a shore A 60-70 while PUR hotmelt shore D 40.

Common colors are amber and black. Minimum quantity applies for special colors.